For the following engine types we produce and stock suitable pistons only. Availability of suitable cylinder liners on request.
The most common suitable spare parts are available ex stock:
The most common suitable spare parts are available ex stock:
For the following engine types we produce and stock pistons only. Availability of cylinder liners on request.
For the following engine types we produce and stock pistons and cylinderliner only. Availability of cylinder liners on request.
For the following engine types we produce and stock pistons only. Availability of cylinder liners on request.
For the following engine types we produce and stock suitable pistons only. Availability of suitable cylinder liners on request.
Customers with Wärtsilä or MaK engines are kindly requested to contact our sister company MMS - Marine Motor Service GmbH in Wenzendorf, Germany.
13.06.2017 - Part 9 is in preparation - Cylinder Liner
13.06.2017 - Part 8 is online - Crank Shaft
13.04.2017 - Part 7 is online - Connecting Rod
02.03.2017 - Part 6 is online - Piston Pins
05.01.2017 - Part 5 is online - Piston Rings
08.12.2016 - Part 4 is online - Pistons
20.10.2016 - Part 3 is online - The Indicatordiagram
16.09.2016 - Part 2 is online - Instruments and procedures
10.08.2016 - Part 1 is online - Indroduction
The data obtained, by following our recommendations can be used to introduce systematic and preventive maintenance procedures at your engine. Read more ...
With more than 50 years of experience in developing and producing pistons up to 500 mm in diameter, SECO is looking back upon an exeptional long tradition in the manufacturing of spare parts for powerplant- and marine Diesel engines, like f.e. pistons and cylinder liners.
After the German reunification in 1990, several engine manufacturers and their licensees approved SECO as an OEM supplier. Since 2005, we have extended our range of products and services substantially. This also includes the production of cylinder liners, connecting rods, valve seat rings and many more engine spare parts.
In addition, we are able to offer a wide selection of high-quality spares such as valves, rotocaps, plunger & barrels, injection nozzles, filters and gaskets.
Made in Germany
Do you require manpower support for scheduled overhauls or engine repair performed by qualified and experienced personell ?
Are you planning to increase the efficiency of your power plant by checking out all cost saving potentials regarding fuel- and lube oil consumption or expensive spare parts?
Exact this is the service we can provide you.
It will be our pleasure to submit our offer for the deployment of our experts at your site. It will take us a maximim of 5 working days at your site to provide with a complete review on your fuel consumption, your tank farm design and a concluding introduction on all our assistance in research.
| 1.Groove - nominal with, new spare part | 6,170 +0.03 mm |
| 1.Groove - Ø-with for calculation | 6.185 mm |
| 1.Groove - upper wear limit | 6.420 mm |
| 1.Groove - wear range, useable | 0.220-0.250 mm |
| 1.Groove - wear range, for calculation | 0.235 mm |
